Easyfix Magnetglaze Pro Extreme – large window insulation
Click for more
The PDF instruction sheet on this page contains a full step-by-step guide to measuring and installing your capping strips using simple household tools. When fitting, make sure to clean and degrease your window surround using our Surface Preparation wipes before sticking the steel tape into position. Additional accessories include the large Mitre Block, for neat 45 degree corners (note that Magnetglaze Pro Extreme is too large for our standard Mitre Block) and you can remove static when peeling off the plastic sheet protective film using our Anti Static Spray.
Glass should never be used with Magnetglaze Pro Extreme, and completed panels are not suitable for an opening door or window frame, or for use outdoors.
If your window is so large as to make a single sheet unfeasible, or you want a part-removable pane for easy ventilation purposes, you can use Magnetglaze Sash Heavy Duty. This add-on system uses a rigid joint with additional seals, so that removal and replacement of the pane is instant, with insulation fully restored. Note that MG Sash Heavy Duty is for 4mm thick sheet only.
The products on this page can use glazing sheet of up to 6mm thick, which we are unable to provide. The One Stop Plastic Shop do offer this - they are an independent company with whom we have traded for many years. Click through for 6mm cut to size Polycarbonate or 6mm cut to size Acrylic if you want to buy direct from them.
Please note that as Magnetglaze Pro Extreme purchases already include the magnetic and steel tape they use, you do not need to order Magnetglaze Extreme packs for use with them, although you need to specify and order the Pro Extreme packs/lengths of course!
If there is not enough space on the surfaces of your window surround to fit Magnetglaze Pro Extreme, Window Conversion Angles can be attached on the insides of the frames to give a suitably wide surface. These are strong Angles with a 25mm face, 3mm thick, in white or brown to complement the kits. More information is in the PDF alongside, with product details on the right hand side of this page
Polycarbonate Glazing Sheet
£49.00 per metre 2 per metre 2
Min height & width 100mm. Max size 2440mm x 1220mm
(height = largest dimension, width = smallest dimension)
N.B. Please check your dimensions carefully before ordering cut sheet as once this has been ordered and cut, it cannot be refunded.
Magnetglaze Pro Extreme 2440mm Lengths
|Bulk Pack 6 x lengths White||£72.00|
|Bulk Pack 6 x lengths Brown||£72.00|
|Single lengths White||£18.00|
|Single lengths Brown||£18.00|
Window Conversion Angles
|Pack 3 x 3m lengths White||£30.00|
|Pack 3 x 3m lengths Brown||£34.00|
|Bulk Pack 10 x 3m lgs White||£78.00|
|Bulk Pack 10 x 3m lgs Brown||£88.00|
|Large Mitre Block||£4.80|
|Surface Preparation Wipes - Pack of 10||£2.20|
|Anti Static Spray - 100ml Bottle||£4.00|